Blog

Infrared gas analyzer is made using the principle that liquid chemical reagents of different formulations selectively directly absorb certain components of gas. Specifically, it is the nature of certain chemical reagents (absorbents) that chemically react with CO2, O2, and co in the exhaust gas, so that a certain amount of exhaust gas is contacted with […]

When performing oxygen content analysis, especially trace oxygen analysis, the oxygen content in the air is as high as 21% O2, so if it is handled improperly, it is easy to cause contamination and interference to the sample, and the analysis result data is incorrect. The main reason is improper operation of the oxygen analyzer. […]

Portable infrared gas analyzer belongs to non-spectral infrared gas analyzer. Its working principle is based on the selective absorption of infrared rays by certain gases. A new intelligent industrial on-line analyzer using a single light source, a single-tube semi-gas chamber, an advanced series thin-film micro-tone detector, and a new type of microcomputer single-chip microcomputer technology. […]

Gas industry terminology. The vibration and rotation spectra of most gas molecules are in the infrared band. When the frequency of the incident infrared radiation is the same as the characteristic frequency of the vibrational rotation of the molecules, the infrared radiation will be absorbed by the gas molecules, causing the attenuation of the radiation […]

The hydrogen analyzer uses the difference between the thermal conductivity of the component to be analyzed and the background component, and the thermal conductivity of the mixed gas changes with the change of the component to be analyzed to work. It is composed of a thermal conductivity gas sensor and an intelligent signal converter. The […]

  1 Infrared gas analyzer is to realize a series of chemical processes A gas analyzer or a gas analysis system is equivalent to a complete set of chemical process equipment. Therefore, the working process of the gas analysis instrument system is to realize a series of chemical processes. If you want to obtain correct […]

Main feature Can be adjusted automatically according to the surrounding air (depending on the measured component) High efficiency does not require calibration gas and accessories. Multi-layer detection ensures high accuracy and small lateral sensitivity. The sampling unit is easy to clean, reducing maintenance costs. User-friendly WINCE operating system, automatic data storage. Open interface structure (RS232, […]