Hydrogen sulfide, molecular formula is H2S, molecular weight is 34.076, is a flammable acid gas under standard conditions, colorless, odorous egg smell at low concentration, poisonous. Its aqueous solution is hydrosulfuric acid. The molecular weight is 34.08, the vapor pressure is 2026.5kPa / 25.5 ° C, the flash point is <-50 ° C, the melting […]
Gas Analyzer
Pumped Oxygen Analyzer
Pumping type gas analyzer is an intelligent high-performance analysis and detection instrument that can continuously monitor the measured gas and has the function of personnel fall alarm. The optional wireless function of the instrument allows security personnel to obtain the instrument data and alarm status in real time from anywhere. Intuitive data display, large 3.2-inch […]
Principle of Infrared Gas Analyzer
The principle of infrared gas analyzer is to use infrared to analyze the body. It is based on the difference in the concentration of the components to be analyzed and the absorbed radiant energy. The remaining radiant energy makes the temperature rise in the detector different, and the pressure on the two sides of the […]
Precautions in Using the Oxygen Analyzer
When performing oxygen content analysis, especially trace oxygen analysis, because the oxygen content in the air is as high as 21% O2, if it is improperly handled, it will easily cause pollution and interference to the sample, and the analysis result data will be incorrect. The main reason is the improper operation of the oxygen […]
Precautions for Using the Oxygen Analyzer
When the oxygen analyzer performs oxygen specific gravity analysis, especially trace oxygen analysis, because the specific gravity of oxygen in the gas is as high as 21% O2, if it is not handled properly, it will easily cause contamination and interference to the sample, resulting in incorrect analysis result data. The reason is caused by […]
Points to Know When Using an Ammonia Gas Detector
According to the national standard “Occupational Exposure Limits for Harmful Factors in the Workplace GBZ2-2002”, the maximum allowable ammonia concentration in the workshop is 30mg / M3, which is about 39.5ppm. In the actual application of ammonia detector, the following values are usually referred to: Average threshold (TLV-TWA): 25 (generally set as a first-level alarm […]
Oxygen Analyzer Instrument Features
Integrated design reduces the influence of external interference on measured values; The probe uses special materials to make it more resistant to corrosion; Instrument housing with high protection level; Built-in display and button design, can ensure the service life of the instrument part even in harsh environments; Standard DN65 flange mounting makes installation simple and […]
Overview of Thermal Conductive Gas Analyzers
Thermal conductivity gas analyzer is a physical gas analysis instrument. Based on the principle that different gases have different heat conduction capabilities, it can estimate the content of certain components by measuring the thermal conductivity of the mixed gas. This kind of analytical instrument is simple and reliable, and it can be used for many kinds […]
Method for Detecting Carbon Dioxide in Air
Carbon dioxide has long been recognized as a colorless, odorless gas. It is heavier than air and its gas density is 1.9659 / L under standard conditions. Carbon dioxide in the atmosphere comes from: fuel combustion, such as boilers, civilian furnaces and other coal, oil, wood fired when burning carbon dioxide; engine exhaust contains high […]
Main Features of Infrared Gas Analyzer
Can be automatically adjusted according to the surrounding air (depending on the measured component) High efficiency does not require calibration gases and accessories. Multi-layer detection guarantees high degree of sensitivity and small lateral sensitivity. The sampling unit is easy to clean and reduces maintenance costs. Humanized WINCE operating system, data is automatically stored. Open interface […]